Tekla Structure Master Course - Build Engineering & Construction

Course Content

Introduction

Tekla Structure 2023 Software & Plugin
Tekla Structure 2023 Installation

13:52
Autocad File
Tekla Model
Introductory Class : User interface, New Model Open, Grid Draw, uses of tools, Steel Component Draw

58:15

Lesson 1

Lesson 2

Lesson 3

Lesson 4

Lesson 5

Lesson 6 : Creating General Arrangement (G.A) Drawing :

Class 1 : Member Numbering, Anchor bolt details & Anchor Bolt Layout Plan

01:18:13
Class 2 : Column layout plan

46:55
Class 3A : Beam Layout Plan.

16:51
Class 3B : Beam layout plan 2

01:00:09
Class 4 : Rafter layout Plan

36:27
Class 5a : Purlin Layout Plan

35:45
Class 5b : Purlin Layout Plan

01:05:26
Class 6 : Creating Section in different grid ( 1 & 2).

47:02
Class 7 : Creating Section in different grid ( 4 & 13 & A).

01:19:05

Lesson 7 : Assembly Drawing

Class 1a : Assembly/Detail Drawing of Column

55:29
Class 1b: Assembly/Detail Drawing of Column

01:02:05
Class 2 : Assembly/ Detail Drawing of interior Column.

01:19:07
Class 3 : Beam Details Drawing

53:13
Class 4 : Rafter Details Drawing or Rafter Assembly drawing

01:01:16
Class 5 : Fabrication Drawing of Tapered Rafter.

01:12:09
Class 6: Bracing Details Drawing.

39:22
Class 7 : Stair Details Drawing

54:09
Class 8 : Roof Sheet & Wall Sheet Drawing.

01:20:06
Class 9 : Bolt List, Part List & Assembly List.

14:54
Class 10 : Visualization.

40:45

Student Ratings & Reviews

No Review Yet

What Will You Learn?

Course Content

Introduction

Tekla Structure 2023 Software & Plugin

Tekla Structure 2023 Installation

Autocad File

Tekla Model

Introductory Class : User interface, New Model Open, Grid Draw, uses of tools, Steel Component Draw

Lesson 1

Class 1: Draw grid in X,Y & Z direction. Draw column

Class 2 : Draw base plate manually & by component

Class 3 : Draw End Plate, Stiffener, brackets, Anchor Bolt

Lesson 2

Class 1 : Draw Rafter, Connection plate manually & by component

Class 2 : Draw roof monitor & Frame complete.

Lesson 3

Class 1: Creating Portal Frame by PEB Member With PEB connection 1.

Class 2 : Creating Portal Frame by PEB Member With PEB connection 2.

Class 3a : Creating portal frame by PEB frame

Class 3b : Creating gable rafter & Column.

Class 4 : Creating Canopy Rafter.

Lesson 4

Class 1 : Creating crane girder.

Class 2a : Creating mezzanine floor (Short Column, Main Beam, SMB)

Class 2b: Creating Mezzanine floor ( Sub beam)

Class 3a : Creating Stair

Class 3b : Stair Beam Modeling .

Class 4 : Strut Member & Wall Bracing Modeling.

Class 5 : Creating Roof Bracing.

Lesson 5

Class 1 : Creating roof purlin.

Class 2 : Creating anti sag rod.

Class 3 : Creating wall girt.

Class 4 : Canopy & Purlin

Class 5 : Finish Modeling

Lesson 6 : Creating General Arrangement (G.A) Drawing :

Class 1 : Member Numbering, Anchor bolt details & Anchor Bolt Layout Plan

Class 2 : Column layout plan

Class 3A : Beam Layout Plan.

Class 3B : Beam layout plan 2

Class 4 : Rafter layout Plan

Class 5a : Purlin Layout Plan

Class 5b : Purlin Layout Plan

Class 6 : Creating Section in different grid ( 1 & 2).

Class 7 : Creating Section in different grid ( 4 & 13 & A).

Lesson 7 : Assembly Drawing

Class 1a : Assembly/Detail Drawing of Column

Class 1b: Assembly/Detail Drawing of Column

Class 2 : Assembly/ Detail Drawing of interior Column.

Class 3 : Beam Details Drawing

Class 4 : Rafter Details Drawing or Rafter Assembly drawing

Class 5 : Fabrication Drawing of Tapered Rafter.

Class 6: Bracing Details Drawing.

Class 7 : Stair Details Drawing

Class 8 : Roof Sheet & Wall Sheet Drawing.

Class 9 : Bolt List, Part List & Assembly List.

Class 10 : Visualization.

Student Ratings & Reviews